30 day moneyback guarantee
clickhereforhelp

Handheld Digital Spectrum Analyzer > RFEXP-6GCOMBO

RFEXP-6GCOMBO - Handheld Digital Spectrum Analyzer

Pocket size and light weight.

Solid aluminum metal case.

Includes a transport EVA carry case for RF Explorer

Spectrum Analyzer mode with Peak Max and Hold, Normal, Overwrite and Averaging modes.

Lifetime free firmware upgrades available, open to community requested features.

High capacity Lithium-ion polymer internal battery for 16hs+ of continuous run, rechargeable by USB.

Can interface to Windows PC running data acquisition and analysis software.

Wide band coverage to all popular RF frequencies, starting at 15MHz and going up to 2.7GHz, as well as 4.85-6.1GHz. This include very interesting frequency areas such as 2m HAM radio, all VHF and UHF, FM radio, GPS, WiFi and WiMax, Bluetooth, etc.

from:


Technical specifications

RF Explorer 6G Combo is a handheld digital spectrum analyzer, a very affordable tool for work in all popular frequency bands. It is based on a highly integrated frequency synthesizer and double balanced mixer which offers high performance, compact size, low consumption and low cost. It has been designed to be used equally well outdoor and indoor, and can be connected to a PC for extra functionality using standard mini-USB 2.0 connector. This model includes a 6G baseline unit plus an RFEMWSUB3G Expansion Module conveniently assembled and tested. It comes with two SMA connectors and three antennas: a nice Nagoya NA-773 wideband telescopic antenna for all Sub-GHz frequencies, a rubber duck 5.8 GHz and a whip helical for 2.4GHz band. Additional, specific band antennas may be needed to cover efficiently some of the frequencies supported. The combination of these two models offer coverage for most used communication frequency range used in modern communication technologies including WiFi, Bluetooth, Wireless Audio and Video, LTE, GSM, GPRS, Satellite, CATV, DTV, etc.

Frequency Bands: 15-2700 MHz and 4850-6100 MHz
Frequency Span: Left SMA port (6G): 2-600Mhz;Right SMA port (WSUB3G): 112KHz - 600MHz
Graphics LCD 128×64 pixels, great visibility outdoors Backlight for great indoor visibility
Connectors 2 standard SMA 50 ohms Spectrum Analyzer connectors: Left SMA port (6G): 4850-6100MHz;Right SMA port (WSUB3G): 15-2700 MHz
Amplitude Resolution: 0.5 dBm
Dynamic Range: Left SMA port (6G): -105dBm to -15dBm;Right SMA port (WSUB3G): -110dBm to -10dBm
Absolute Max Input Power: Left SMA port (6G): +25dBm;Right SMA port (WSUB3G): +30dBm
Average Noise Level (typical): -105 dBm
Frequency Stability and Accuracy (typical): Left SMA port (6G): +-0.5ppm;Right SMA port (WSUB3G): +-10ppm
Amplitude Stability and Accuracy (typical): Left SMA port (6G): +-3dBm;Right SMA port (WSUB3G): +-6dBm
Frequency Resolution: 1 kHz
Resolution Bandwidth (RBW): Left SMA port (6G): automatic 58Khz to 812Khz Right SMA port (WSUB3G): automatic 3Khz to 600Khz
Dimensions  4.4 x 2.6 x 0.98 in | 113 x 70 x 25 mm
Weight  225 g


CellAntenna credit card options
Home | Privacy Statement | Support | News center | Contact
Copyright by CellAntenna.com 2016